CAE Healthcare Fidelis Lucina, Руководство пользователя

Страница: 273 / 390

Care and Maintenance
245
Maintenance Advice
Simple care and maintenance helps to ensure that the maternal fetal simulator stays in good working
condition. Many problems are caused by inadequate or improper maintenance. Perform a thorough
check of the various components each time the simulator is used.
General Simulator Care
Follow these general simulator care guidelines to protect and care for the simulator:
• Avoid the use of writing instruments and sharp objects near the patient
simulator to prevent unattractive markings on or tears in the skin.
• Lubricate airway adjuncts and urinary catheters with cottonseed oil spray
(and NOT a water-based lubricant) prior to insertion.
• A mild detergent and warm water will remove most marks and stains.
Gently rub the soiled area with a soft cloth. Do NOT use ABRASIVE soaps or
pads.
• Prior to using moulage of any kind, CAE Healthcare suggests the
application of a very light coating of petroleum jelly, followed by a light
dusting of baby powder to the simulator’s skin. This application makes
cleaning the skin easier.
• If any of the bleeding, genitourinary or IV features on the maternal
mannequin have been used, drain and clean the simulator as described in
the following pages. Failure to drain and clean the systems may cause
problems with the system.
• Prior to any simulation, CAE Healthcare suggests applying a light coat of
lubricant (cotton seed oil) on the hip skin between the torso and thighs to
help prevent rubbing or pinching. Wipe any excess oil to prevent dripping.
Storing the Simulator
When in regular use, the maternal fetal simulator breakdown procedure and general cleanup are
sufficient to prepare the simulator for storage.
In addition, be certain to follow these instructions:
• Storage temperature should not exceed 122
o
F (50
o
C) or fall below 39
o
F
(4
o
C).
• If a soft-sided simulator case is being used, the simulator should lay flat on
its back.
• The simulator should NEVER be stored or shipped with fluids in the system.