CAE Healthcare Fidelis Lucina, Руководство пользователя

Страница: 123 / 390

Using Müse
95
The default crying type is Modeled , with crying sounds based on APGAR
scores.
4. Click Close to close the window without transitioning the mother to
postpartum or, to close the window and transition the mother to
postpartum, click
Proceed to postpartum . This event will be logged.
NOTE: The Proceed to postpartum option will only appear in the Neonate
Status Window if "Including Postpartum" was selected on the Patient
Baseline screen.
The window closes and the delivery is logged in Müse.
Neonate crying settings can be modified at any time after delivery by
clicking the
Show Neonate Status icon again or clicking the Sounds
Controls .
In SCEs where the baby is delivered by C-section, Müse automatically detects delivery. However, the
Show Neonate Status icon is enabled throughout the simulation and can be used to display APGAR
score and control neonatal crying.
IMPORTANT: The placenta should only be delivered AFTER the baby is marked as delivered.
Transitioning the Mother to Postpartum
NOTE: The Proceed to postpartum option will only appear in the Neonate Status Window if Including
Postpartum option was selected on the Patient Baseline screen.
If additional assessments and interventions are to be performed after the baby has been delivered and
the delivery has been logged in Müse, the patient and mannequin must be transitioned to the
postpartum phase.
1. From the Neonate Status Window, click Proceed to postpartum .
2. Once the baby has been marked as delivered, the Delivery icon is replaced
by the Postpartum indicator.
The Run Screen
The
Postpartum
indicator