Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 444 / 684

450 LXi Owner Manual 5-2 Engine Messenger System
Rev. “C”
~ 5-2-33 ~
Table 16 - “Driver Entry Screens Table”
Screen Parameter Description
“Driver Entry”
“Active Driver”
“Driver Entry Title
Screen”
This screen shows the current DRIVER IDs whenever the text for “ACTIVE DRIVER”
is indicated. This is the second screen after the display is fi rst powered up. This is
shown automatically. Pressing any button will display the next screen in the power
up sequence.
Press the Left arrow button in order to move one column to the Left.
Press the Down arrow button in order to select the DRIVER ID screen.
If the “Fleet Trip” has been reset, the screen will indicate “NO ACTIVE DRIVER” when
the “ACTIVE DRIVER” text is indicated.
“Select “
“DRIVER ID’”
“Select Previously
Entered DRIVER
ID”
Press the Left arrow button in order to select one of the two DRIVER IDs. The fi rst
DRIVER ID will be shown.
If no DRIVER IDs have been entered, a message “NO DRIVER IDs ENTERED!” will
appear. Press any button to go back to the “DRIVER ENTRY” title screen.
“DRIVER ID” #1
“Select DRIVER
ID #1”
This screen shows the fi rst DRIVER ID. The screen will indicate “DRIVER ID 1”. Press
the Left arrow button in order to enter the ID code as the current driver. The display
will begin recording information for this driver. Display returns to “DRIVER ENTRY”
title screen.
“DRIVER ID” #2”
“Select DRIVER
ID #2”
This screen shows the second DRIVER ID that was entered. Press the Left arrow
button in order to enter this ID code as the current driver. The display will begin to
record information on the second driver. Display returns to “DRIVER ENTRY” title
screen.
“Enter DRIVER
ID”
“Enter New
DRIVER ID”
Press the Down arrow button or the Up arrow button in order to scroll through
numbers 0 to 9. Press the Down arrow button or the Up arrow button in order to
scroll through letters A to Z. The Right arrow button and Left arrow button move
between locations for the characters. A space may be entered by moving through
a space for a character without selecting a character. Press the Down arrow
button and release the Down arrow button in order to scroll through the available
characters. Press the Up arrow button and release the Up arrow button in order
to scroll through the available characters. If two DRIVER IDs have been entered,
a “MAX DRIVER IDs ENTERED!” message will appear. Press any button in order to
return to the “DRIVER ENTRY” title screen.
If no characters have been entered a message will appear. The display will show “A
CHARACTER MUST BE ENTERED!” on the screen.
“If DRIVER ID
Correct”
“Accept New
DRIVER ID”
This screen shows the DRIVER ID that was entered. Press the Left arrow button in
order to enter this DRIVER ID and return the display to the “DRIVER ENTRY” title
screen. This ID code will be shown as the “Current Driver”.
All vehicle data will be recorded to this driver.
Press the Up, Down, or Right arrow button in order to return the display to the
“ENTER NEW DRIVER ID” screen. This may be done in order to clear the DRIVER ID
that was just entered.
5-2-15 State Crossing Screens
5-2.15.1 The 3176B, 3176C, C-10, C11, C-12, C13, C15, C-15, C-16,
and 3406E Engines Only
The Messenger display will record information for the “Distance Traveled”, “Fuel Used”, “PTO Fuel Used”, and “Idle Fuel Used”
in the United States or in Canada. The state must be entered in order for the display to record the information for the vehicle.
The screen will show the last state that was entered into the display. This information is reset with the “Fleet Trip Segment”.
The state selection should be performed when the vehicle is not moving. All fi fty US states and twelve Canadian provinces are
provided in this display.