Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 197 / 684

4-14 Appliances
450 LXi Owner Manual
~ 4-14-32 ~
Rev. “C”
Reinstall burner, being careful that the end of the burner fi ts into the slot on the
burner bracket. Check to make sure slots are centered under the fl ue tube and the
thermocouple is positioned properly (tip of thermocouple extends over two slots of
burner).
Be sure to reconnect the wire to high voltage electrode. Check the electrode for
proper location and gap. (
See fi gure at left )
Turn on manual gas shutoff valve and check all fi ttings for leaks.
Connect 120 volt power cord to the outlet and reconnect or turn on the 12 volt DC
power.
Check LP gas safety shutoff.
10.
11.
12.
13.
14.
REPLACING A HALOGEN LAMP
Refrigerator
The lamp is located at the top of the refrigerator compartment.
To replace the lamp proceed as follows:
Unhook the tab on the lamp cover by pressing in with the thumb on the side of the lamp cover.
Remove the lamp cover.
With gloves, pull out the lamp from the socket and replace it with a new 12V, 10-watt halogen lamp base G4.
Replace the lamp cover by placing the two tabs into the corresponding slots of the lamp house and press the tab into
place.
Freezer
The lamp is located on the right side of the freezer compartment.
To replace the lamp proceed as follows:
Unhook the tab on the lamp cover by pressing in with the thumb on the side of the lamp cover.
Remove the lamp cover.
With gloves, pull out the lamp from the socket and replace it with a new 12V, 5-watt halogen lamp base G4.
Replace the lamp cover by placing the two tabs into the corresponding slots of the lamp house and press the tab into
place.
1.
2.
3.
4.
1.
2.
3.
4.
WARNING!!
DO NOT use a wire or pin when cleaning the burner jet as
damage can occur to the precision opening. This can cause damage to the
refrigerator or create a fi re hazard.
CAUTION!!
Turn off the refrigerator before replacing the lamp. Wear gloves as protection against hot
lamp, broken glass and as protection of the new lamp.