Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 15 / 684

~ 1-1-4 ~
1-1 Safety Features
450 LXi Owner Manual
Rev. “C”
1-1.2.6 Operation, Testing and Maintenance
Operation:
The smoke alarm is operating once the battery is correctly connected. The LED will fl ash every
minute to show the battery is supplying power to the alarm. When production of combustion are sensed, the unit
sounds a loud alarm which continues until the air is cleared.
False Alarms “Mute” control:
Models (S/SLL) with the mute feature have the capability of temporarily
reducing the sensitivity of the alarm circuit for approximately 10 minutes. This feature is to be used only when a
known alarm condition such as smoke from cooking activates the smoke alarm. The smoke alarm horn is muted
by pushing and holding the test button on the alarm cover for 5 seconds. The smoke alarm will automatically
reduce sensitivity and the LED will “fl ash” every 10-20 seconds for approximately 10 minutes to indicate the alarm
is in temporary mute condition. The smoke alarm is completely operational during the mute cycle and will alarm
if the smoke density increases. After the 10 minute mute cycle the alarm will “beep” twice letting you know it has
automatically returned to normal sensitivity.
Testing:
Test the alarm by pushing the test button on the smoke alarm cover for at least three seconds, until the alarm
sounds. The alarm sounds if all electronic circuitry, horn and battery are working. If no alarm sounds, the unit has a defective
battery or other failure and should be replaced immediately.
Test each smoke alarm weekly to be sure it is installed correctly and operating properly.
Stand at arm’s length from the smoke alarm when testing. The alarm horn is loud to alert you to an emergency. The
alarm horn may be harmful to your hearing.
The test button accurately tests all functions. Never use an open fl ame from a match or lighter to test this smoke alarm.
You may ignite and set fi re to the smoke alarm and your home.
Test smoke alarm operation after vehicle has been in storage, before each trip, and at least once per week during use.
Maintenance: This smoke alarm has been designed to be as maintenance free as possible, but there are a few simple
things you must do to keep it working properly.
Test each smoke alarm at least once a week.
Keep a supply of approved 9 volt replacement batteries on hand.
Test smoke alarms used in RVs after vehicle has been in storage, before each trip and at least once per week during use.
Failure to test smoke alarm used in RV’s as described may remove your protection.
Gently vacuum off any dust on the cover of the smoke alarm monthly with your vacuum’s soft brush attachment. Test unit
once you have vacuumed the cover.
Never use water, cleaners or solvents since they may damage the smoke alarm.
Relocate the smoke alarm if it sounds frequently with unwanted alarms.
When the battery becomes weak, the unit will “beep” about once a minute (the low battery warning). This, low battery
warning should last for 30 days, but you should replace the battery immediately to continue your protection.
Replace your Smoke Alarms at least every 10 years. This includes models with 10-year batteries (SA-668LL and SA-
668SLL). Manufacturers date code is on the back of the Alarm.
•
•
•
•
•
•
•
•
•
•
•
•
•
CAUTION!!
Before using the “mute” feature, identify the source of smoke and be certain that safe conditions exist.