Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 361 / 684

4-16 Audio/Video Components
450 LXi Owner Manual
~ 4-16-154 ~
Rev. “C”
Setting Spending and Time Limits
- Highlight the Limits tab to set
the maximum spending limit. You can set the maximum purchase price on a
per-event basis.
To change the displayed limit:
Highlight the Max Spending button
Press SELECT to display the SPENDING LIMIT pop-up panel.
Use this menu to set the specifi c hours and maximum hours the satellite
receiver can be used for viewing.
Use the number buttons on the remote control to set the limit or use the
joystick to increase or decrease each digit.
Use the joystick to highlight the digit that you want to change. The
maximum limit is $655 per event.
Highlight OK and press SELECT to confi rm the entered amount.
1.
2.
3.
4.
5.
4-16.6.35 Questions and Answers
Questions?
Did we leave something out? Below is a list that was compiled consisting of the most common questions and
their answers.
Q I had a signal but now I am getting a message “Searching for satellite signal. To access related utilities, press
SELECT.” What happened?
A Rain clouds and snow can affect the satellite signal reception. This loss of signal is temporary. Also check for new
growth on trees and bushes that could be blocking the signal. One other possibility is that the wind or someone has
moved the satellite dish antenna.
Q Why can’t I control my TV?
A Before you can control your TV, VCR, or any other device besides your satellite receiver, you must program
your remote control to match your different devices. See Using the Remote Control section in this manual for specifi c
instructions. If you have already successfully programmed your remote control, try pressing the appropriate key to
put your remote in the proper mode. Then try controlling that device. Also, make sure that the batteries in the
remote control are good.
Q My satellite receiver does not respond when I press keys. What’s wrong?
A Most likely, if the front panel keys work but the remote control doesn’t work, try pressing the SAT button before
trying to control the digital satellite receiver. If that doesn’t work, press the SAT and MUTE buttons together and
try again. If that doesn’t work, or if the front panel buttons don’t work either, unplug your digital satellite receiver for
30 seconds, then plug it back in. Your satellite receiver is a computing device. it is susceptible to erratic changes in
power and/or signal, just as any other computer, and these sudden changes can cause it to become “confused.”
Q Some channels look good, while others freeze or indicate that no signal is available. What’s wrong?
A The most common causes for this behavior relate to an improperly grounded satellite cable. Check the cable between
your digital satellite receiver and the satellite dish antenna. Confi rm that RG-6 (not RG-59) cable is used and does not
exceed 100 feet in length. Longer cable runs require amplifi cation. This special amplifi er is available from your dealer.
Q How can I watch one channel while recording another?
A With only one digital satellite receiver, unfortunately, you can’t. Each receiver can only decode one channel at a
time.
Q
I’m getting a message to call some extension, Why?
A There are many different reasons for this. If you want to watch the channel that is displaying the message, call
DIRECT TV at 1-800-531-5000.
Q Why don’t I have an on-screen offer to purchase pay per view programs?
A There are three possibilities; your digital satellite receiver must be connected to a phone line and it is not, or DIRECT
TV doesn’t realize that your phone line is connected or has disabled your ability to make on-screen purchases. Call
DIRECT TV at 1-800-531-5000 for assistance.