Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 274 / 684

450 LXi Owner Manual 4-16 Audio/Video Components
Rev. “C”
~ 4-16-67 ~
Connecting Amplifi er (5.1 ch Surround System) [Digital Connection] DECK → Dolby Digital Decoder →
Amplifi er→ Speaker
Or
DECK → DTS (digital theater systems) Decoder → Amplifi er → Speaker
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK
OPTICAL digital audio output connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy
theater-quality audio in your home. [An optical digital audio cable (optional) is required when an optional Dolby Digital
decoder or DTS decoder is used.]
4-16.4.19 Initial Setup for Basic Connections
(Ready to Play)
Before Doing Initial Setup
Turn TV on.
See connections (A) RF Coaxial Cable Connection and (B) AV Cable Connection
<RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO
[DECK
→
TV]
Go to “Doing Initial Setup (Ready to Play)”
[Cable Box
→
DECK
→
TV], [DSS
→
DECK
→
TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.
• If you use a DSS Receiver, it must be turned off.
1.
2.
3.
•
CAUTION!!
For optical digital audio output connector:
When connecting an amplifi er (with an Optical Digital Input Connector) which does not contain the Dolby Digital or
DTS decoder, be sure to select “PCM” at “Dolby Digital” and “PCM” at “dts” of the Settings for DVD Operation “AUDIO
OUTPUT” Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears
and damage your speakers.
When a Dolby Digital/DTS decoder is connected, please select “Bitstream” at “dts” or “Dolby Digital” of the Settings
for DVD Operation “AUDIO OUTPUT”. If “PCM” is selected, there will be stereo sound.
Video CDs and CDs can be played as usual.
•
•
•
NOTE: Some DTS decoders which do not support DVD-DTS interface may not work properly with DECK.