Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 427 / 684

5-2 Engine Messenger System
450 LXi Owner Manual
~ 5-2-16 ~ Rev. “C”
Table 6 - “Trip Segment Example”
Miles Description
500
A state crossing is entered and the vehicle operation is now recorded for
State 2. The data for State 1 is stored.
1000
Driver 2 begins driving and the vehicle operation is now recorded for
Driver 2. The data for Driver 1 is stored.
2000
A third state crossing is entered and the vehicle operation is now recorded
for State 3. The data for State 1 and State 2 is stored.
2800
The Driver Trip Segment is reset. The Fleet and “Lifetime” information is
not affected.
3300
Driver 1 returns as the driver. New information is now added to the
previous Driver 1 records. The records for Driver 2 are stored.
3800
The vehicle has re-entered State 2. Operational information is now added
to the State 2 records. The information for State 1 and State 3 are still
stored.
5000
The Fleet Trip is reset. This clears the State and DRIVER ID records. Driver
Trip and Lifetime Totals are unaffected.
5-2.6 The Driver Totals Information for the 3176B,
3176C, 3406E, C-10, C11, C-12, C13, C15, C-15,
and C-16 Engines
The Driver Trip Segment is set by the driver. The driver sets the point to begin and the driver sets the point to end. The
procedure is similar to setting a trip odometer. The Driver Trip Segment Totals are independent of the DRIVER ID. If a new
driver begins operating the vehicle, resetting the DRIVER ID will not reset the Driver Trip Segment. The screen for the Driver
Trip segment has ten parameters. The parameters are “Average Fuel Economy”, “Distance Traveled”, “Average Speed”, “Fuel
Used”, “Engine Run Hours”, “PTO Fuel Used”, “PTO Hours”, “Idle Fuel Used”, “Idle Hours”, and “Percent Idle Time”.
5-2.6.1 Accessing the Driver Trip Screens
The display may be moved Up or Down from Column 2 of the screen map from any of the Driver Trip Screens. The “FLEET
TRIP” screen may also be navigated in the same way as the “DRIVER TRIP” screen. The Down, Up, and Right arrow buttons
are available from any of the “DRIVER TRIP DATA” screens. Moving to the corresponding “FLEET TRIP” information allows the
driver to compare current “DRIVER TRIP” data to “FLEET TRIP” data. The desired screen should be selected prior to driving.