Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 429 / 684

5-2 Engine Messenger System
450 LXi Owner Manual
~ 5-2-18 ~ Rev. “C”
5-2.6.2 “Fleet Trip Totals” Screens
The screen for the Fleet Trip Segment has ten parameters. The parameters are “Average Fuel Economy”, “Distance Traveled”,
“Average Speed”, “Fuel Used”, “Engine Run Hours”, “PTO Fuel Used”, “PTO Hours”, “Idle Fuel Used”, “Idle Hours”, and
“Percent Idle Time”. The information for the Fleet Trip Segment is controlled by the fl eet owner. The information may be
controlled by the driver if the ECM has been programmed to allow the driver to reset the display on the Fleet Trip Segment.
5-2.6.3 Accessing the “Fleet Trip” Screens
The display may be moved Up or Down from any of the “Fleet Trip” Screens. The “Driver Trip” screen and the “Lifetime Total”
screen may also be navigated in the same way as the “Fleet Trip” screen. The Left Down, Up, and Right arrow buttons are
available from any of the “Fleet Trip Data” screens. Moving to the corresponding “Driver Trip Segment” or “Lifetime Total”
information allows the driver to compare current “Fleet Trip Data” to the “Driver Trip” data or “Lifetime Total data. The desired
screen should be selected prior to driving.
5-2.6.4 Reset Protection of Fleet Trip Totals
The “Fleet Trip Totals” may be reset with the Messenger display or the “Fleet Trip Totals” may be reset with an electronic
service tool by the Fleet Owner. Resetting is controlled by a Customer Programmable Parameter that is programmed into the
engine ECM by the Fleet Owner. The parameter must fi rst be programmed into the ECM. The power to the display must be
turned OFF and ON In order for the display to recognize the change.
Fleet Owner Control for Reset of the Fleet Trip Segment
The Fleet Trip Reset may be controlled by the Fleet Owner. The display may be reset with Caterpillar Fleet Information
Software or with an electronic service tool.
ECM Allows the Messenger Display to Reset the Fleet Trip Segment
The Fleet Trip Reset may be controlled by the driver. The display is reset with the dash display, with Caterpillar Fleet
Information Software, or with an electronic service tool.
All Data Has Been Cleared and the Fleet Trip Segment is Reset
A Fleet Trip Reset will clear all “Fleet Trip Totals”, “Fleet Trip State Totals”, “DRIVER ID”, and “State Crossings”. No other
information is affected.
Table 8 - “Fleet Trip” Screens
Screen Parameter Description
“FLEET TRIP
TOTALS”
“Fleet Trip Totals Title
Screen”
“Down arrow-View Fleet Trip Fuel Economy Data.”
“Left arrow-Moves one column to the left.”
“Right arrow-Moves one column to the right.”
−
−
−
“FLT” “AVG-MPG
“Fleet Trip Segment
Average Fuel Economy”
“Shows average fuel economy and distance traveled during the current
Fleet Trip Segment.”
“Left arrow-Driver Trip Average Fuel Economy.”
“Right arrow-Lifetime Average Fuel Economy.”
“Down arrow-Fleet Trip Fuel Used and Gallons Used Per Hour.”
“Up arrow-Fleet Trip Totals title screen.”
−
−
−
−
−
“FLT”
“AVG - MPH”
“Fleet Trip Segment
Average Speed”
“Shows average vehicle speed during the current Fleet Trip Segment.”
“Left arrow-Driver Trip Average Speed.”
“Right arrow-Lifetime Average Speed.”
“Down arrow-Fleet Fuel Used and Engine Hours during current trip.”
“Up arrow-Fleet Trip Fuel Economy title screen.”
−
−
−
−
−