Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 344 / 684

450 LXi Owner Manual 4-16 Audio/Video Components
Rev. “C”
~ 4-16-137 ~
4-16.6.12 Connecting a Home Entertainment System
You can integrate the DIRECT TV® Receiver into your entertainment system to take advantage of enhanced audio and video
capability. Follow these instructions to connect your DIRECT TV Receiver.
NOTE:
To connect the DIRECT TV Receiver to your audio system, use A/V cables to connect the satellite receiver to the audio
receiver’s AUDIO IN jacks.
Dolby Digital - With the GCEB0A model, you can enjoy programs that contain a Dolby Digital sound track. We
recommend that you listen in surround sound for maximum enjoyment of these programs. You can connect the
stereo outputs of the GCEB0A to a receiver that contains a Dolby Surround Pro Logic decoder. This will provide you
with three audio channels in the front and a mono surround channel.
To take full advantage of Dolby Digital programming, connect the GCEB0A digital audio output to an external 5.1-
channel Dolby Digital decoder or receiver. This provides you with three front channels, two independent surround
channels, and a sub-woofer channel.
Connect the satellite antenna RG-6 coaxial cable to the DIRECT TV Receiver’s SATELLITE IN jack.
Connect the DIRECT TV Receiver’s A/V jacks to the VCR and A/V receiver’s A/V jacks.
AUX, optical connection, and digital output connections - If your audio receiver has coaxial or optical digital connectors,
connect the appropriate type of cable to the DIRECT TV Receiver’s DIGITAL AUDIO OUT for two-channel digital stereo.
If your A/V receiver is also capable of decoding Dolby Digital, use this connection in order to listen in full 5.1-channel
surround sound. Additional audio information begins on Adjusting Audio and Video section found later in manual.
Connect the VCR’s A/V OUT jacks to a pair of the A/V receiver’s A/V IN jacks.
Connect the A/V receiver’s MONITOR OUT jack to the TV’s VIDEO IN jack.
Plug the components into an electrical outlet.
•
•
•
1.
2.
3.
4.
5.
6.
NOTE: The A/V receiver must be turned on in order to send the video signal to your TV.
NOTE: If you have connected a VCR to your entertainment system in a way that routes the satellite
receiver’s signal to your VCR before it reaches the TV, you may see a distorted picture if you try to record a copy-
protected program. A Can’t Tape symbol in the screen banner identifi es these programs. If this occurs, simply
stop recording and the picture will automatically correct itself.