Blue Bird Coachworks 450 LXi, Руководство пользователя

Страница: 192 / 684

450 LXi Owner Manual 4-14 Appliances
Rev. “C”
~ 4-14-27 ~
THERMOSTAT
The thermostat on the refrigerator controls both the gas and electric operation, thereby eliminating the necessity of resetting
each time a different energy source is employed.
After the initial start-up, the thermostat should be moved from “COLDEST” to the desired temperature setting, usually at mid
setting.
TO SHUT OFF THE REFRIGERATOR
The refrigerator may be shut off while in any mode of operation by pressing the main power ON/OFF button to the UP (OFF)
position. This shuts off all DC power to the refrigerator, including the interior light.
4-14.14.6 Start Up Instructions
A continuous 12 volt DC supply must be available for the electronic control to function.
Press the main power ON/OFF button (1) to the DOWN position.
Press the TEMPERATURE SELECTOR button (3) until the lamp at the desired setting is illuminated.
AES/AUTO MODE
Press the AES/AUTO/GAS mode selector button (2) to turn ON the AES/AUTO lamp (B). If 120 volts is available, the AC
mode indicator lamp (A) will illuminate indicating AC operation. If 120 volts AC is not available, the GAS indicator lamp (C)
will illuminate indicating the control has automatically switched to the GAS mode.
If the CHECK indicator lamp (D) illuminates and the GAS mode indicator lamp (C) is off, the controls have failed to ignite
the burner in the GAS mode. GAS operation may be reset by pressing the main power ON/OFF button (1) to the OFF then
ON position. (
See step 2 under GAS MODE ).
Press the TEMPERATURE SELECTOR button (3) until the lamp at the desired position is illuminated.
GAS MODE
Press the AES/AUTO/GAS mode selector button (2) to turn OFF the AES/AUTO lamp (B). The GAS mode indicator lamp (C)
will illuminate. Within 45 seconds the burner should be ignited and operating normally.
On the initial refrigerator start-up, it may take longer than 45 seconds to allow air to be purged from the gas line. If the
gas does not ignite within 45 seconds the CHECK indicator lamp (D) will illuminate and the GAS mode indicator lamp (C)
will go off.
To reset when the CHECK indicator lamp (D) is illuminated, press the main power ON/OFF button (1) to the OFF and then
ON position.
Press the TEMPERATURE SELECTOR button (3) until the lamp at the desired position is illuminated.
THERMOSTAT
The thermostat on the refrigerator controls both the gas and electric operation, thereby eliminating the necessity of resetting
each time a different energy source is employed.
After the initial start-up, the thermostat should be moved from “COLDEST” to the desired temperature setting, usually at mid
setting.
A.
B.
C.
1.
2.
3.
1.
2.
NOTE: Do not continue to reset GAS operation if the CHECK indicator lamp continues to be illuminated after
several tries.