BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
9/64
3.2.1 Connecting to telephones with a handset cable
•
Basic view / position of the connections on the back of the unit enclosure:
1. Pull out the handset cable plug on the side of your telephone.
2. Plug the free end of your handset cable in either of the CallRecorder unit’s two ‘Handset’
sockets.
3. Insert one of the plugs of the supplied RJ6 cable (small Western jack) into the CallRecorder
unit’s other ‘Handset’ socket.
4. Then plug the other end of this cable into the now free handset connection socket on your
telephone.
Tip:
If the handset cable on your telephone does not have plug connectors, you can
have a telephone engineer cut the cable at a suitable point and fit two RJ6 plugs (4/4
Western jacks) on the free cable ends. You then connect these plugs with the Call-
Recorder unit’s two ‘Handset’ sockets.
Please note, however, that such action will impact on your telephone supplier’s warranty
and guarantee rights. Furthermore, in the case of rented or leased telephone systems,
for example, you should check in advance whether such modifications are allowed.
Handset
Line
Power USB
Control
