BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
22/64
4. Getting started and recordings with the
CR-100 USB
NOTE:
This entire chapter is about handling the CR-100 USB for recordings directly
to the PC or laptop via USB-connection.
Once you have connected your CR-100 USB unit as per section 3 and installed all of
the required software components, you can start using it and experimenting with your
first recordings.
If it is not already running, start up the software. The little symbol on the taskbar will
initially be bluish and will then become green as soon as a USB connection is
established to the CR-100 USB unit. You can also see that there is an active USB
connection by the yellow ‘USB’ LED being lit up on the unit itself.
You will see the displays and controls shown below on the top of the unit:
USB
connection
Power
supply
Microphone
activated
Start / Stop
button
Monitor button /
Volume
Recording
indicator
Loudspeaker
(bottom)
Control
input
