BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
35/64
NOTE:
The default password, which is used for all recordings, is ‘
1234
’. Be sure to
change this to a password of your own. If possible, use a combination of letters and
numbers.
5.2 Recording telephone conversations
Having now installed your CR-200 unit and the clock and optionally an individual
configuration set, you can now start to record telephone conversations. To do this, the
device has to be powered up, the USB flashdrive stick inserted and the „Status“ LED
lighting green. If the LED is flashing green, the memory capacity is nearly exhausted. If
it is flashing red, the flashdrive stick is full. In this case, you first have to import
recordings from the flashdrive stick to you PC or laptop and delete the files on the
flashdrive or format it. If the LED is flashing green with short pulses, the unit is in
standby mode (see also item 5 below). Regarding the several indications of the LED,
please also refer to the beginning of chapter 5.
1. Start recording
Depending on how your CR-200 is configured, the recording starts automatically as
soon as an audio signal from a telephone conversation is received from your telephone,
or you can manually start the recording manually by pressing the red ‘Start / Stop’
button on the device. On delivery, the automatic recording start is activated.
NOTE:
If problems with the automatic recording start should occur, you should deacti-
vate the ‘Start recording automatically’ option in the configuration of the CR-200 unit
(see section 7.2).
2. Finish recording
You can choose to have the recording stopped automatically by the CR-200 unit if no
more audio signals are received for a given period, or you can manually press the red
‘Start / Stop’ button to stop it (depending on how the CR-200 is configured – see section
7.2).
3. Saving or refusing recordings
So that you can check it is recording, the status LED lights up red on the CR-200 while
a recording is being made. When the recording has finished, the LED flashes red for a
few more seconds (the duration is adjustable, see section 7.2). While the LED is
flashing red, you can save or refuse the recording that has just finished by pressing
again on the unit’s red ‘Start / Stop’ button (according to configuration settings and
software version of the device, see section 7.2).
