BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
18/64
3.3 Installing the software
For the operation of the CallRecorder units you need the CallRecorder PC software.
This can be found on the CDROM or flashdrive stick supplied. You can also download
the latest versions from www.beyertone.com from the “Support“ area free of charge.
The PC software from version 4.0 is the same for both variants of the CallRecorder. It is
needed for the CR-100 USB as well as for the CR-200:
•
for recording of conversations via USB cable
(with CR-100 USB)
•
for importing and converting recordings from the flashdrive stick
(with CR-200)
•
for archiving and playing back of recordings
•
for configuration of the CallRecorder devices
The following steps describe how to install the required software components on your
PC or laptop. Please be absolutely sure to do everything as described below:
3.3.1 Installing the PC software
For operation of the CallRecorder you have to set up the PC software on your PC or
laptop. To do this, run the ‘setup.exe’ file from the directory for your preferred language
in the ‘Software’ folder on the CDROM or Flashdrive Stick supplied with the unit. As you
go through the process, follow the installation wizard’s instructions.
After the installation is finished, you can start up the PC software. As you do so, the
software will place a small symbol (a microphone with a cassette) on your taskbar. All of
the software’s functions and settings screens can be launched from here by right-
clicking with the mouse:
The menu options available to you are:
•
‘Control Dialog’ *: Launch the record / playback dialog window
(* this menu item is only active when a CR-100 USB is connected)
•
‘Archive’: Launch the archive function for managing and replaying recordings
