BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
14/64
3.2.4 Other connections on the CallRecorder
The CallRecorder has a built-in loudspeaker, via which a monitor function is provided,
i.e. enabling telephone conversations to be output, with or without being recorded, if, for
example, the telephone does not have its own built-in speaker. (So-called ‘hands-free’
conversations are, however, not possible via the CallRecorder.)
With the
CR-100 USB
unit, you can also listen to recorded conversations using the PC
software, without the PC needing a sound card or speaker itself.
•
Headphones output (‘Phones’ socket)
In the instances described above, playback can also be via an external earphone or
headphones (not included) instead of via the built-in loudspeaker. Any standard
earphone or set of (mono/stereo) headphones can be connected by being plugged into
the ‘Phones’ socket (3.5mm jack plug). This automatically cuts out the integrated
loudspeaker.
•
Control connection (‘Control’ socket)
For external control of the CallRecorder, an external switch/button can be connected to
the ‘Control’ socket (3.5mm jack plug on the back of the unit). Depending on the functio-
nality provided by the system software and enabled via the PC software, this switch can
e.g. control the recording or enable play-back control similar to that of a dictation
machine, e.g. when used as a foot-operated switch. To find out which functions can
currently be controlled this way, please see the relevant information in the version of the
system / PC software that you are using and/or the information in the following chapters
(for CR-200 see 5.5).
The drawing below shows the basic connection of a switch/button via a 3,5mm jack plug
cable:
IMPORTANT:
The contact used here must be a dry contact.
