BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
30/64
4.5 TAPI control
If you’re using the CR-100 USB on a telephone which is connected to a telephone
system and if your PC is connected to the telephone system by a so called “TAPI”
interface (which e.g. enables dialling telephone numbers from the PC), then you can
also control the CR-100 USB via the TAPI interface. This e.g. enables a direct control
for recordings synchronised to the telephone’s status and capturing the number of the
party calling or called to be saved together with the recording.
To be able to use the TAPI functionality, first please make the following required
settings. To do this, open ‘Configuration / Software’ from the menu (right click on the
CallRecorder symbol on the taskbar).
•
The ‘TAPI’ tab:
Enable TAPI control by clicking ‘Enable call indication’ and under ‘TSP’ choose the
appropriate „Service Provider“ from your PC. The ‘Number’ shown is your own number
registered for the TAPI driver on your PC.
