BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
57/64
•
The ‘Record’ tab:
‘Enable call detection’ in the ‘Start’ section lets you choose whether the recording of the
CR-200 starts automatically, whenever the acoustic signals on the telephone exceed a
certain threshold. The ‘Manual start/stop’ via the red button on the device can also be
activated or deactivated. Checking ‘Enable speaker’ predetermines that the CR-200’s
monitor function will be automatically activated.
Under ‘Data’, you can select either the so-called ‘a-law’ codec (Europe) or ‘µ-law’ codec
(USA/Japan) for the recording’s ‘Audio format’. As a rule, your PC will be able to play
back .wav files of either format without any problems. Furthermore, you can Restrict the
maximum recording length, which will cause the CallRecorder to stop the recording at
the maximum recording time set here automatically.
In the ‘Level’ section you can set how high the ‘Amplification’ should be of the audio
signal being received. Reduce this level if your recordings are distorted and increase it if
they are too quiet. Alternatively, you can also enable ‘Automatic level control’, set with
the desired action.
