BEYERTONE
®
www.beyertone.com
© VIII-2011 BEYERTONE GmbH
CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide
13/64
•
Switching to microphone (‘Mic off-on’ switch)
You can use the CallRecorder not only to record telephone conversations but also,
using the built-in microphone, to record in-room conversations, such as group
discussions. To do this, simply move the ‘Mic off-on’ switch to the ‘on’ position, which is
indicated by a yellow LED on the front panel. For a guide on further use of this feature,
please see section 4.4 or 5.4. To make recordings of the telephone conversations via
the handset or telephone connection cable, the ‘Mic off-on’ switch must be in the ‘off’
position.
NOTE:
After recording an in-room conversation do not forget to put the ‘Mic off-on’
switch back to the ‘off’ position if you subsequently want to record telephone
conversations again with your CallRecorder.
•
Microphone input (‘ext. Mic’ socket)
To the input jack 'ext. Mic' (3.5mm jack plug) you can connect a suitable external
microphone. The integrated microphone will be deactivated automatically then.
•
Position of connections and switches on the left side of the unit
(CR-100 USB)
:
•
Position of connections and switches on the left side of the unit
(CR-200)
:
•
Switch on/off unit
(‘Power on-off’ switch on CR-200)
If you don’t need your CR-200 for a longer time, you can simply switch it off by means of
this switch. Regardless of the backup time provided (see section 5.1), the internal clock
will be powered nevertheless, as long as the power adapter is connected to the unit.
Phones
ext. Mic
Line
Mic
B
A
off
on
Phones
ext. Mic
Power
Mic
off
on
off
on
