89000109-002
xVue Touch Installation Manual
Rev 2
Page 6-19
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For Use in Non-Certified Aircraft
Figure 6-26 V-Speed Tape Illustration
WARNING
ONLY A CERTIFIED MECHANIC MAY SET THE AIRSPEED VALUES. THESE VALUES MUST
MATCH THE CERTIFIED SPEEDS IN THE AIRPLANE FLIGHT MANUAL (AFM), PILOT’S
OPERATING HANDBOOK (POH), OR OTHER LEGAL DOCUMENTATION (E.G. PLACARDS).
NOTE
THE V-SPEED UNITS ARE DEFINED IN SECTION 6.2.1.8 UNITS CONFIGURATION AND THE V-
SPEED VALUES ARE CLEARED IF THE UNITS ARE CHANGED.
NOTE
AS AIRSPEED VALUES ARE ENTERED, PHYSICAL LOCATIONS ARE POPULATED ON THE
MOCK AIRSPEED TAPE. ONCE AN ENTRY IS MADE, THE ENTRY FILL MAY NOT BE
REPOSITIONED TO ACCOMMODATE ANOTHER ENTRY EVEN IF THE LATER ENTRY HAS
HIGHER PRIORITY THAN THE FORMER. THIS BEHAVIOR MAY RESULT IN OVERLAPPING
ENTRIES AND VALUES THAT ARE NOT SEEN.
