Belden Grass Valley Kaleido-X, Инструкция по установке и обслуживанию

Страница: 97 / 216

97
Kaleido-X (7RU)
Installation & Service Manual
From multiviewer to peripheral devices
From peripheral devices to multiviewer
The following ports must be open on peripheral devices (for example, router controllers):
Router drivers also use default ports:
Port Used for Transport Notes
5120 RCP2 TCP Used to listen for Kaleido Software discovery packets
10000 TCP For RCP2 protocol
10001 TCP For RCP2 protocol
5120 UDP On multicast 230.8.8.9 for RCP2 protocol
5121 UDP For RCP2 protocol
80 HTTP TCP Used by the RCP-200 to obtain information from the
multiviewer’s system database
13000 TCP Used by the RCP-200 to control the multiviewer via the
gateway
Port Used for Transport Notes
25 SMTP TCP Simple Mail Transfer Protocol, for e-mail alerts.
8851 AlVelte TCP Used to obtain information from Plura
(AlVelte) Studio Production Timer (SPT)
systems.
5100 GPI-1501 TCP Used to obtain information from GPI-1501 General
Purpose Interface I/O modules.
1
1.See also: From multiviewer to multiviewer , on page 96.
8910
2
2.Configurable.
TSL (network) TCP Used to obtain information from TSL devices that use
the TSL UMD version 5.0 protocol.
Transport Port Notes
TCP 2000 Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-02 protocol
TCP 4381 Used to control the multiviewer’s internal router via the Nevion
(Network) protocol
TCP 5194 Used to control the multiviewer’s internal router via the NVEP Router
(NP0016) protocol.
TCP 14000 Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-08 protocol