Belden Grass Valley Kaleido-X, Инструкция по установке и обслуживанию

Страница: 94 / 216

94
IP Network Setup
Changing the IP Address of a Kaleido-X from the Monitor Wall
The Kaleido-X is shipped with the following default settings:
Changing the IP Address of a Kaleido-X from the Monitor Wall
The IP address, system name, and other parameters can be set via a control panel on the
monitor wall.
To change the IP address of the Kaleido-X from the monitor wall:
1 Connect a mouse to the USB connector of an output card.
2 Connect a USB keyboard to the USB connector of an output card.
3 Right-click anywhere on the monitor wall, point to Monitor wall (if you clicked a
monitor), and then click System configuration .
The System Configuration window appears.
4 Click the Ethernet tab.
5 Type the required Frame IP address, network mask, and gateway address in the
appropriate boxes.
6 Type the required addresses for all outputs.
7 Click OK .
8 When prompted to restart the system to apply your changes, click Yes .
The new configuration will become effective once the system restart has completed.
Kaleido-X (7 RU) Kaleido-X (14 RU) 14RU (expansion)
Frame IP address 10.0.3.70 10.0.3.70 10.0.3.70
Network mask 255.255.0.0 255.255.0.0 255.255.0.0
Gateway 10.0.0.1 10.0.0.1 10.0.0.1
Output A 10.0.3.66 10.0.3.66 10.0.3.66
Output B 10.0.3.67 10.0.3.67 10.0.3.67
Output C 10.0.3.68 10.0.3.68 10.0.3.68
Output D/EXP 10.0.3.69 — —
Output A (frame B) — 10.0.3.61 10.0.3.61
Output B (frame B) — 10.0.3.62 10.0.3.62
Output C (frame B) — 10.0.3.63 10.0.3.63
Note:
If the IP address of the Kaleido-X has been changed (i.e. it no longer
corresponds to the as-shipped configuration), it is still possible to determine
the IP address. To determine the IP address of your Kaleido-X, see
Verifying
the System IP Address, System Name, and Application Version , on page 160.