Belden Grass Valley Kaleido-X, Инструкция по установке и обслуживанию

Страница: 132 / 216

132
System Configuration
Viewing a Multiviewer’s Status Information
Status and Options page for a Kaleido-X 4RU
• In the case of a Kaleido-X (7RU) or Kaleido-X (14RU), cards are presented in the
order they appear, from left to right when looking at the front of the chassis.
• In the case of a Kaleido-X (4RU), cards are presented in the order they appear,
starting from the top left corner down, and again from the top right corner, when
looking at the front of the chassis.
• Some heading rows may show a card type, serial number, firmware and safe mode
versions, a module status indicator, and input signal status indicators.
• You can identify which output card currently assumes the software master role (and
is thus assigned the multiviewer’s IP address) by looking for the word “master” next
to the card’s identifier, for example: “OUTPUT A (master)”. This is shown in the figure
below.
• The module status indicator shows whether the card (or module) is running
normally (green) or in safe mode (red).
• The signal status indicators reveals the presence of a valid input signal at the
corresponding connector.
2 Move the pointer to an input signal status indicator to view the associated signal
format.
Card type Serial number
Version information
Input signal status
Input signal format
Status indicator
This card is currently the
software master