Belden Grass Valley Kaleido-X, Инструкция по установке и обслуживанию

Страница: 202 / 216

202
Kaleido-IP/Kaleido-X Cascade Step-by-Step Configuration
Limitations
output assignment for each RCP user, sources/channels and router configurations,
pointer size configuration.
• When configuring text or alarm levels, they must match exactly on both multiviewers.
See Setting the Same Channels/Sources Content Between Multiviewers on page 195.
• If two multiviewers in a cascade are connected to the same router, then the router
name should be the same in both configurations. Conversely, two different routers in
the same cascade must not have the same name.
• Serial ports are not shared between cascade members. A serial device connected to
one multiviewer in a cascade is not known to the other cascade members.
• Audio monitoring is not supported.
• RCP operation: In the case of a cascade system, monitor wall functions performed via
the associated buttons on a Kaleido-RCP2 or RCP-200 (ASPECT RATIO, UNDERSCAN,
FULL SCREEN, etc.) only work in parts of the layout associated with the multiviewer that
is directly connected to the displays.
Workaround: Use the monitor wall menu.
• Router outputs are not cascaded.
• Working against the same cascade system in concurrent XEdit sessions is not
supported.
• EDID auto-detection is not supported. When configuring a cascade room, make sure
the Use detected monitor resolution check box is not selected for any of its displays.
Refer to “Enabling EDID Auto-Detection from the Monitor Wall“, or “Enabling EDID
Auto-Detection in XEdit“, in the Kaleido Software User’s Manual, for details. See
Related
Documentation on page 15.
Note:
After changing the pointer size for a room, on all multiviewers in a
cascade, you must restart every multiviewer, for the change to become
effective across the cascade system.