Belden Grass Valley Kaleido-X, Инструкция по установке и обслуживанию

Страница: 55 / 216

55
Kaleido-X (7RU)
Installation & Service Manual
6 On the Configure menu, point to Database , and then click Restore backup to load the
the downloaded database (
Kaleido-X (14RU).zip
).
With the factory defaults loaded, you can start using your Kaleido-X expansion system
and its default rooms and layouts (you may see some warnings on the monitor wall
about layout/room assignments). Normally, however, you will at this point wish to
customize the room, layout and other settings:
7 Add cards to, or remove them from, the System list so that it reflects the physical
configuration of the expansion system:
8 Configure other settings (logical sources, destinations, rooms, layouts, etc.) as you
would for any new Kaleido-X system (refer to Creating and Configuring Logical Sources,
Managing Rooms, and Managing Layouts, in the Kaleido Software User’s Manual; see
Related Documentation , on page 15).
9 On the File menu, click Save to save the changes to the system.
10 On the Configure menu, point to Database , and then click Export .
11 Type the IP address of the expansion frame, and then click OK .
A confirmation message appears.
12 Click OK .
TIP
Once you have created new Rooms manually, you can use the Copy layout
feature (see
page 63 ) to copy existing layouts from another Kaleido-X.
Note:
You should make a backup of the new database.
Right-click a card slot to
insert or remove a card