Belden Grass Valley Kaleido-X, Инструкция по установке и обслуживанию

Страница: 96 / 216

96
IP Network Setup
TCP/UDP Port Usage
From multiviewer to multiviewer
The following ports, used for inter-frame communications, are open by default on all
Kaleido Multiviewer systems:
From iControl to multiviewer
Between multiviewer and remote control panel
The following ports, used for communications to/from RCP-200 and Kaleido-RCP2 control
panels, are open by default on all Kaleido Multiviewer systems:
Port Used for Transport Notes
22 SSH TCP Secure Shell Login is required to login to a multiviewer for
maintenance.
4160 Java Jini TCP Responsible for discovery and communications between
devices/services on a network.
8080 HTTP TCP
8082 TCP Internal communication
8083 TCP Internal communication
8084 TCP Internal communication
8085 TCP Internal communication
8086 TCP Internal communication
8087 TCP Used for debugging purposes
8090 TCP Web service
32769 TCP filenet-rpc
5120 UDP On multicast 230.8.8.9 for RCP2
7572 UDP On multicast 230.8.8.8 for “keep-alive” (heartbeat)
7571 UDP For “keep-alive” (heartbeat)
5100 Densité TCP Internal communication within a Kaleido-MX,
Kaleido-MX 4K, or Kaleido-Modular-X multiviewer
system; communication with modules housed in a
Densité frame.
Port Used for Transport Notes
4160 Java Jini TCP Responsible for discovery and communications between
devices/services on a network.
32768–
65535 Java RMI TCP Remote Method Invocation (client/server
communication). Dynamic Allocation of ports. Required
for communication between client and Application
Server. This range can be restricted to match specific
security requirements. A minimum of 4000 ports should
be allocated.