Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3 - Controls and Indicators
3.2 On/Off Switch
The system power (On/Off) rocker switch is on the rear of the instrument at the
bottom right (see Figure 7).When in the " 0 " (Off) position, power is removed
from the instrument. When in the "1" (On) position, power is applied to the
instrument. Power must be turned on for the incubator, agitator, and culture
testing modules to work. For normal operation, the power should remain On at
all times (except during some maintenance procedures).
Figure 7 - On/Off Switch
3.3 Keypad and LCD Display
The keypad and LCD display are located on the front of the BACTEC® 9050
instrument, at the bottom center.The keypad is used to enter information and
issue commands to the instrument.The LCD display presents setup and status
information. See Figure 8.
The controls and indicators of the keypad and LCD display are presented in
clockwise order from the top right of the module.
MA-0103-5
23
Artisan Technology Group - Quality Instrumentation ... Guaranteed I (888) 88-SOURCE I www.artisantg.com