Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6 - Maintenance
6.3.1 Front Cabinet Components
Front cabinet components include the door damper cylinder, the door sensor
switch, the rotor, and the RTD.
6.3.1.1 D a m p e r Cylinder
To replace the damper cylinder, follow the steps below and refer to Figure 20.
Required Materials
Small Flathead Screwdriver
To Remove the
Damper
Cylinder
I B e g i n the removal at the end of the damper cylinder near the bottom cen-
ter of the door interior. Pry the metal clip off with a small flathead screw-
driver.
2 P u l l the clip out of the hole.
3 S n a p the cylinder's cap off the ball.
4 R e p e a t these steps for the other end (near the instrument interior) and
remove the damper cylinder.
5 R e v e r s e the steps to replace the damper cylinder.When snapping the cap
over the ball, be sure to reinforce ball from the bottom.
MA-0103-L3
5 9
Artisan Technology Group - Quality Instrumentation ... Guaranteed I (888) 88-SOURCE I www.artisantg.com