BECKWITH ELECTRIC M-6280A, Инструкция

Страница: 193 / 462

M-6280A Instruction Book
4–2
4.1 UNIT SETUP
....................................
4–6
GENERAL UNIT SETUP ............................... 4–6
USER ACCESS CODES ............................... 4–6
Setting Level 1 or Level 2 User
Access Codes From The HMI
................... 4–6
Setting Level 1 or Level 2 User
Access Codes From CapTalk ................... 4–7
Setting Multi Level Access Codes
From CapTalk ............................................ 4–9
USER LINES ............................................... 4–11
Setting User Lines From The HMI ........... 4–11
Setting User Lines From CapTalk ® .......... 4–12
SYSTEM CLOCK ........................................ 4–12
Setting Time/Date and Daylight Savings
From The HMI
......................................... 4–12
Setting Time/Date and Daylight Savings
From CapTalk .......................................... 4–14
OSCILLOGRAPH SETUP ........................... 4–15
Setup Oscillograph Recorder .................. 4–17
SEQUENCE OF EVENTS RECORDER ..... 4–18
Event Logic.............................................. 4–19
Setup Sequence of Events Recorder ...... 4–20
WAKEUP SCREENS .................................. 4–22
Selecting Wakeup Screen Parameters .... 4–22
COMMUNICATION ..................................... 4–23
Direct Connections .................................. 4–23
Protocols ................................................. 4–23
Communication Access Security
and Timeout ............................................ 4–23
Enabling Communication Access Security
and Timeout From The HMI ................ 4–24
Enabling Communication Access Security
and Setting Timeout From CapTalk ..... 4–25
Source Address Validation ...................... 4–25
Enabling Source Address Validation
From The HMI ..................................... 4–25
Enabling Source Address Validation
From CapTalk ...................................... 4–26
Feeder and/or Substation Addressing ..... 4–27
Setting Substation Address
From The HMI ..................................... 4–28
Setting Feeder Address
From The HMI ..................................... 4–29
Setting Communication Addresses
From CapTalk ...................................... 4–30
Save Block Auto at Power Off ................. 4–31
Setting Save Block Auto at Power
Off From The HMI ............................... 4–31
Setting Save Block Auto at Power
Off From CapTalk ................................ 4–32
Optional Ethernet Port ............................. 4–32
Ethernet Port Configuration
From CapTalk ...................................... 4–33
HMI Configuration of the Control's
Ethernet Port for use on a network
that supports DHCP Protocol .............. 4–34
HMI Configuration of the Control's
Ethernet Port for use on a network that
does not support DHCP Protocol ........ 4–35
MODBUS
®
Port and DNP Port Settings
From The HMI ......................................... 4–37
Ethernet Connection Timeout Settings
From The HMI ......................................... 4–38
Changing Ethernet Connection Timeout
From CapTalk .......................................... 4–39
RS-232/RS-485/Fiber Optic Port Setup
From The HMI ......................................... 4–40
RS-232/RS-485/Fiber Optic Port Setup
From CapTalk .......................................... 4–43
Optional RS-232 Module Setup
From The HMI ......................................... 4–44
RS-232 Module Port Setup
From CapTalk .......................................... 4–47