Baxall Pyramid 2 Скачать руководство пользователя страница 5

Страница: 5 / 72

Page 5

Installation and Operating Instructions

Pyramid 2 Keyboard

PRODUCT SAFETY

Please follow these instructions as you install the equipment and keep them for future use.
Installation is only to be carried out by competent, qualified and experienced personnel in accordance with the

country of installations National Wiring Regulations. Failure to do so can result in injury or death by electric

shock. A means of disconnecting the equipment from the supply must be provided as part of the installation

and must be situated close by.

This unit contains hazardous voltages and it must be isolated and disconnected from the supply before any

covers are removed or any servicing is carried out.

Do not exceed the voltage and temperature limits given in the specification.
Only use this equipment in a clean, dry, dust-free environment.
Before cleaining this equipment, isolate the unit. Use only a dry, lint-free cloth. Do not use cleaning fluids or

solvents.

 If you have any problems, contact Baxall Limited.

ELECTROMAGNETIC COMPATIBILITY (EMC)

 This is a Class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

 This product is intended for use in general purpose CCTV applications in a residential, commercial or light

industrial EMC environment. Refer to Baxall Limited before using the product in medical and/or intrinsically

safe applications or in an industrial EMC environment.

 The product must be installed in accordance with good installation practice for EMC to enable the product to

function as intended and to prevent EMC problems.

MANUFACTURERS DECLARATION OF CONFORMANCE

A Declaration of Conformity in accordance with the following EU standards has been made and is on file at Baxall Limited,

Stockport SK6 2SU England.
The manufacturer declares that the product supplied with this document is complaint with the provisions of the EMC

Directive 89/336 EEC and the Low Voltage Directive LVD 73/23 EEC, the CE Marking Directive 93/68 EEC and all associated

amendments.

UNPACKING

Keep your packaging for use if the product is to be stored for an extended period or needs to be returned for any reason.

The packaging should contain:
Pyramid 2 Keyboard

PY-NAP (Network Access Point)

PY-NIL (2 Metre RJ45 connection lead)

PY2-ISC (Installer Smart Card)

PSU22 (1A switch mode power supply unit)

These instructions

Check the product code on the serial number label. If you have an incorrect item or it is damaged then inform the suppliers

and carriers immediately. If this is the case then do not attempt to use the equipment.

THESE INSTRUCTIONS

The Pyramid 2 Keyboard Installation and Operating Manual has been prepared in sections so that the appropriate parts

can be issued to the operators. The manual includes sections explaining basic and advanced operations, and also features

sections written exclusively for supervisors and installers.
This manual is also available in pdf. format from the Baxall website,

www.baxall.com

Содержание Pyramid 2









































































Результаты поиска

Содержание Pyramid 2

Отзывы:

Baxall Pyramid 2, Инструкция по установке и эксплуатации, Страница: 5 / 72

Результаты поиска

Содержание Pyramid 2

Отзывы: