Baxall Pyramid 2 Скачать руководство пользователя страница 46

Страница: 46 / 72

Page 46

Pyramid 2 Keyboard

Installation and Operating Instructions

PROGRAMMING SMART CARDS

7. If the user was granted access to the matrix menu, select

Menu Privileges

. A list of the options available in the matrix

menu system is displayed. Follow the same procedure that was detailed in the previous step to grant the required menu

privileges.

1.4
Keyboard Privileges
Menu Privileges

1.4.2

+ Programming Smartcards
+ Setting sequences
+ Installer’s details
+ Set time and date
   Serial Port config
   Alarm config
   Printer log config
   Video source config
   Caption config

Figure 64 - Setting Menu Privileges

When the privileges have been set, push the joystick left twice to return to the

Smartcard Programming

screen. The

Privileges

menu item now displays the text

to indicate that this field has been completed.

8. Select the

Resource Code

menu item. This item is used to set what buttons and screens will be created for the

operator when they use the Pyramid 2 Keyboard. Use the

Text Editor

screen again to enter one of the following three

digit codes, and then press the

Enter

soft-key.

011

Basic User

Code 011 enables the camera, monitor, preset and sequence selection buttons. The use of the PTZ controls

is enabled, as are the Auxiliary 1 and 2 buttons.

012

Basic User with alarm response access

Code 012 enables the same screens and buttons as code 011, with the added inclusion of the Alarm Display

screen. A user with this resource code can then accept and clear alarms.

013

Advanced User

Code 013 enables the same screens and buttons as code 011, and in addition, it enables the Auxiliary 3 and

4 buttons, the patrol and random tour buttons, and the VCR, multiplexer and HDR control screens.

014

Advanced User with alarm response access

Code 014 enables the same screens and buttons as code 013, with the added inclusion of the Alarm Display

screen. A user with this resource code can then accept and clear alarms.

015

Supervisor

Code 015 enables the same screens and buttons as code 014, with the addition of the preset and privacy

zone programming screens. A user with this resource code can also access the matrix menu system.

When assigning the

Resource Code

, the privileges that were assigned at steps 5 and 6 should be considered. For

example, if a user has been assigned access to the matrix menu system but is then given the Resource Code 011

(Basic User), they will not be able to access the menu system anyway. This is because the keyboard screen that allows

access to the matrix menu system is not provided to basic users.

Note

There is also an installers configuration which is enabled when an PY2-ISC installers card is inserted. These cards are

programmed exclusively at Baxall, and one is included with this keyboard. Only one installers card should be used on

a system at one time.

9. Select the

Pin number

menu item. This item is used to set the pin number that the operator will have to enter each time

that they log on to the Pyramid 2 Keyboard. Use the

Text Editor

screen to enter a four-digit pin number, and then press

the

Enter

soft-key.

10. Select the

Group ID

menu item. This item is not currently used, but a number must still be entered. Using the

Text

Editor

screen, enter a number and then press the

Enter

soft-key.

Содержание Pyramid 2









































































Результаты поиска

Содержание Pyramid 2

Отзывы:

Baxall Pyramid 2, Инструкция по установке и эксплуатации, Страница: 46 / 72

Результаты поиска

Содержание Pyramid 2

Отзывы: