Baxall Pyramid 2, Инструкция по установке и эксплуатации, Страница: 15 / 72

Page 15
Installation and Operating Instructions Pyramid 2 Keyboard
RECALLING A PRESET
When a camera is connected to a receiver, not only is the operator able to manually control the camera using the joystick,
focus and iris controls, they can also use the functions that are available in the PTZ Camera Control screen.
One of these functions is the Recall Preset function.
Recalling a Preset Position
A preset consists of information stored by a receiver that will move a camera to a particular location each time the preset is
recalled. The receiver must be capable of storing preset information and many receivers (including Pyramid receivers)
have the capability to store up to 128 such positions.
To move a camera to a preset position:
1. Select a suitable camera whose preset position is to be recalled - see
Selecting a Camera on page 14. The PTZ
Camera Control screen is displayed.
2. Enter the preset number using the number keys.
3. Press the
Preset soft-key.
Operator Operator Setup
12... 12...
Camera Monitor
1 1
P
3
Figure 15 - Recalling a Preset
Recalling a Preset Position Globally
You can simultaneously move all of the controllable cameras to any one of the preset positions (assuming that the preset
has been programmed for each camera).
To recall a global preset:
1. In the
PTZ Camera Control screen, press the Global soft-key. The Global icon will turn to inverted colours to indicate
that it is turned on.
2. Use the number keys to enter the required preset position.
3. Press the
Preset soft-key. Every camera that has had this preset number programmed will move to the appropriate
position. Any cameras without this preset number programmed (or any cameras without telemetry control) will remain
in the same position.
Figure 16 - Recalling a Global Preset
Operator Operator Setup
12... 12...
Camera Monitor
1 1
P
3
1
Notes
• For more details on programming preset positions, see page 40.
• Domes and devices accessed via bridges or Universal Dome Interfaces can be operated using a Pyramid 2 Keyboard.
These devices usually have preset control, although the number of presets may differ. 128 presets is the maximum
supported by the Pyramid 2 Keyboard.