Baxall Pyramid 2 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 72

Baxall Pyramid 2 Скачать руководство пользователя страница 12

Page 12

Pyramid 2 Keyboard

Installation and Operating Instructions

POWERING UP THE KEYBOARD

When the keyboard is first powered up, the screen below should be displayed. If this is not the case, check the connections

to ensure that everything is correct. If the connections are found to be correct and there is still no response, contact Baxall

for assistance.

Please Insert Smart Card

L I M I T E D

Figure 8 - The Welcome Screen

LOGGING ON

Access to the Pyramid 2 Keyboard is strictly controlled by the use of smart cards. For this reason, it is recommended that

each user is supplied with their own smart card, as this guarantees that the Pyramid system is secure and tamper-proof.
A smart card can be programmed so that it contains information about an operator, such as the access rights that they

have, and the password that they must enter to gain access to the keyboard. It also stores the resource code that an

operator has been assigned. The resource code is a setting that is used to split keyboard operators into four groups - basic

users, advanced users, supervisors, and installers. The group that an operator is placed into will define which screens and

functions they are able to access.
Operators will also have been assigned a priority level. This setting is used to resolve conflicts between two users. For

example, if two users are trying to take control of the same PTZ camera, the user with the higher priority level will gain

control. This is known as mugging. For details on the LCD messages that are displayed to resolve mugging issues, see

LCD Messages

on page 70.

Once an operator has been issued with their programmed smart card, they will be able to log on to the keyboard. To do this,

follow the instructions below:
1. Insert a smart card into the rear of the keyboard. The gold contact and the Baxall Pyramid 2 logo should be facing

upwards as the smart card is inserted:

Smart Card

Figure 9 - Inserting a Smart Card

2. After a few seconds, the

Password Entry

screen is displayed. Using the numeric keypad, enter the correct password

and press the

Enter

soft-key.

«
...
10
11
12
13
14
...
»

Содержание Pyramid 2









































































Отзывы:

Нет отзывов