Baxall Pyramid 2, Инструкция по установке и эксплуатации, Страница: 19 / 72

Page 19
Installation and Operating Instructions Pyramid 2 Keyboard
USING MULTI-MATRIX UNITS
A Pyramid system can include multiple matrix units, and for this reason the Pyramid 2 Keyboard has the capability to
assume control of more than one matrix unit. When an operator begins a session, the keyboard will always log on to the
last matrix that was controlled, but if this is not the desired matrix, the operator can easily select which matrix unit to control.
To assume control of a different matrix unit, follow the steps below:
1. Go to the
Monitor/Camera Selection screen. The easiest way to do this is to select a camera with no receiver, as the
keyboard will be returned to the required screen. Alternatively, close down the Pyramid 2 Keyboard and log back on
again. The Monitor/Camera Selection screen is the opening screen.
2. Using the number keys, enter the number of the matrix that is to be controlled.
3. Press the
Matrix Select soft-key.
Figure 22 - Matrix Selection
Operator Operator Setup
12... 12...
Camera Monitor
? ?
3
Note
For users with advanced privileges, the Matrix Select soft-key can also be found in the PTZ Camera Control screen. To
access it:
1. Select a camera with a receiver to display the
PTZ Camera Control screen - see Selecting a Camera on page 14.
2. Press the Next soft-key.
3. The Matrix Select soft-key is displayed on the resulting screen.
Figure 23 - PTZ Camera Control Screens
VCR / MUX Operator Operator Setup
12... 12...
Camera Monitor
1 1
Next
P
VCR / MUX
Camera Monitor
1 1
Operator Operator Setup
Back
2
12... 12...
3