Baumer PosCon3D, Руководство по эксплуатации

Страница: 6 / 64

en_BA_OxE7
_PosCon3D.docx
6/64 Baumer Electric AG
17.07.2014 14:21/tof V1.01 ANW_81125407 Frauenfeld, Switzerland
2.2 Installation
Standard installation
In standard installation, the sensor is mounted at a
right angle to the reference surface or the object. The
sensor is not taught into the reference surface so
configuration is very easy and straightforward.
This installation method is recommended even if the
reference surface cannot be taught in for some
reason or another.
Angled installation
In angled installation, the sensor can be mounted
at an angle of up to +/- 30° in relation to the
reference surface. This installation method is used
when space conditions do not allow any other
installation option or the mounting angle is not
known.
Align the sensor as accurately as possible at a right
angle to the reference surface (background) or to the
object (if there is no reference surface in the
measuring field). The object must be within the
measuring field, i.e. the distance from the sensor
must be between 150 and 250 mm. The sensor may be mounted at an angle inclined
maximally 30° to the left or to the right of the
reference surface (background) or to the object (if
there is no reference surface in the measuring
field).
The reference surface (background) or the object
must be within the measuring field, i.e. the
distance from the sensor must be between 150
and 250 mm.
2
NOTE
The "Edge L rise or Edge R rise" mode can be used as an aid to find the zero point.
Now an object is slowly pushed toward the presumed zero point. The zero point is
reached by the left rising edge of the object when the value 0 mm is shown on the
sensor display and the yellow LED switches..
0 mm
+62.5 mm
@250 mm
-62.5 mm
@250 mm
right
left
150 mm
<100 mm
Measuring
field
0 mm
+54.6 mm
@250 mm
-73.0 mm
@250 mm
right
left
0 mm
150 mm
Measuring
field
+/-30°
<100 mm
Reference surface