Baumer PosCon3D, Руководство по эксплуатации

Страница: 28 / 64

en_BA_OxE7
_PosCon3D.docx
28/64 Baumer Electric AG
17.07.2014 14:21/tof V1.01 ANW_81125407 Frauenfeld, Switzerland
5.4 MEAS TYPE
The detected edges can be output in various ways, for example as simple edges (distance of the desired
edge in mm from the center of the measuring range) or also the width or center of an object as a value in mm,
calculated from two edges.
The measuring modes and their calculation are described below.
5.4.1 Edge L rise
The edge of the first rising flank from the left.
Distance in mm measured from the center of the measuring range of the sensor to the edge.
5.4.2 Edge L fall
The edge of the first falling flank from the left.
Distance in mm measured from the center of the measuring range of the sensor to the edge.
Measuring
value
in mm
Measuring
value
in mm
Measuring
value
in mm
Measuring
value
in mm
- +
- +
- +
- +
Left Right
Left
Right
Left Right
Left
Right