en_BA_OxE7
_PosCon3D.docx
32/64
Baumer Electric AG
17.07.2014 14:21/tof V1.01 ANW_81125407
Frauenfeld, Switzerland
5.5 EDGE HEIGHT / OBJECT HEIGHT / GAP DEPTH
The minimum step height which the sensor should detect as an edge can be entered in mm here. By default,
this step height is set to 4 mm.
2 mm is preset as the smallest detectable step. If the detected step is smaller than the value entered here, it is
not detected as an edge.
5.6 OBJECT
To improve sensitivity to dark objects, the exposure time can be increased. At the same time, the measuring
repeat time changes as well.
Bright objects
Measuring repeat time
< 5 ms
Response time
< 10 ms
Release time
< 10 ms
Dark objects
Measuring repeat time
< 7 ms
Response time
< 14 ms
Release time
< 14 ms
5.7 PRECISION
The accuracy can be increased by averaging an increased number of measurements. This also reduces the
measuring speed.
Mode
Sensor setting
Standard
Median
=off
Moving Average
=off
High
Median
=7
Moving Average
=16
Very High
Median
=15
Moving Average
=128
Average
Moving averages (also known as rolling or running averages) reduce the existing variation in a series.
Therefore they are frequently used to smoothen series.
The arithmetic mean (or also the average) is the sum of a collection of numbers divided by the number of
numbers in the collection:
Содержание PosCon3D
Страница 1: ......
