Baumer PosCon3D, Руководство по эксплуатации

Страница: 38 / 64

en_BA_OxE7
_PosCon3D.docx
38/64 Baumer Electric AG
17.07.2014 14:21/tof V1.01 ANW_81125407 Frauenfeld, Switzerland
5.9 FIELD OF VIEW
The measuring field can be changed using the "FIELD OF VIEW" function. This is particularly useful when e.g.
an edge or an undesired object is in the measuring range which should not be detected, or when the sensor is
in an angled state and the measuring field should be limited (secured measuring field as a rectangle AUTO).
The measuring field is adapted by software so the width of the visible laser beam does not change.
When the edge is outside the defined measuring field, the red LED lights up and the alarm output is activated.
5.9.1 AUTO
With this function the measuring field can be limited to a rectangle. This function is particularly useful in the
inclined state because the borders of the measuring field can be more easily recognized thanks to the
rectangle (secured measuring field in height and width).
The maximum width is automatically calculated by entering the height; the rectangle (height and width) shown
on the display is saved by pressing SET for 2 seconds.
When the rectangular measuring field is activated, the following symbol appears on the left side of the screen.
Entering height H in mm
: The width of the rectangle is automatically set to the maximum allowable value
within the measuring field.
NOTE
The LIMIT LEFT, LIMIT RIGHT and
OFFSET functions can be used as an aid to
determine the position of the defined
rectangle within the measuring field. The
values of this rectangle are shown in this
menu.
NOTE
When using AUTO, already set
measurement field limitations (left,
right and offset) are canceled (eg
offset is set to 0).
Height
Width
Left
Right
Measuring
field
AUTO-
Rectangle
0 mm