Barudan BENS, Руководство по эксплуатации

Страница: 72 / 103

7. Move the Start/Stop bar to the left or
press the Start button to begin sewing.
•
At times you may need to inspect the
embroidery during sewing. When
sewing is stopped, you can move
within a pattern using the jog keys, do
whatever is necessary, and return to
the last point sewn by pressing the
Origin key. The Origin key is used to
move from the last point, to pattern
origin, and back to the last point.
When finished sewing, exit Drive mode to
access to the Read and Memory menu options.
Exiting the Drive Mode
1.
Move the Start/Stop bar to the right or
press the Stop button to stop sewing.
The D21 message flashes on screen,
notifying you that the machine was
stopped with the bar.
To clear the message, press D, below
the Check icon.
2.
Press and hold the Drive softkey until
the BENS stops beeping and the Drive
indicator light begins to flash.
Changing the Origin
If necessary, you can move the pantograph while the machine is in Drive
mode and start sewing from the new position, changing the pattern origin.
BENS Operation Guide - 12/99 Sewing 3-9
Perimeter Trace Screen
Drive
Softkey