Barudan BENS, Руководство по эксплуатации

Страница: 55 / 103

Merging Patterns with Movement
1. Press the Read softkey. The floppy disk list displays. If there is no disk
in the disk drive, and Disk was the last device used, error A30
displays on the screen. Press any
menu key to clear the message,
then proceed with Step 2.
2. The icon at the top left of the
screen identifies the active device.
Press A, below the Device icon,
until the Jog icon displays. The list
of patterns in memory displays.
The BENS automatically selects the
next empty location. The location
number on the left side of the
screen flashes, indicating it is
empty.
3. Press D, below the Execute icon.
The Jog screen displays.
NOTE: If desired, at the Jog screen
you can add pantograph movement
before the first pattern, changing its
origin. Refer to Steps 8-10 in this
section for instructions on adding
movement.
4.
Press B, below the Copy icon. The
Memory Copy screen displays.
•
The location number on the
right is the destination, the
empty location that will store the
merged patterns. This number should
be flashing.
•
The number on the left is the source,
and changes as you use the jog keys to
move through the list.
5. Use the jog keys to select the first pattern
to be transferred to the empty memory
location.
NOTE: The pattern list is not displayed at
this point.
2-24 Memory Operations BENS Operation Guide - 12/99
Read
Softkey