Barudan BENS, Руководство по эксплуатации

Страница: 74 / 103

2. Press D, below the Execute icon, to allow the machine to locate origin.
The pantograph moves to machine origin, as determined by the origin
sensor.
The Standby screen displays, showing the memory location and name
of the pattern that was being sewn when power was shut off, as well as
the number of the last stitch sewn.
3. Press C, below the Yes icon, to return to the position of the last stitch
sewn. To cancel the Standby option, press D, below the No icon.
4.
Move the Start/Stop bar to the left or press the green Start button to
begin embroidering.
Manual Operations
Manual operations are machine
actions that can be executed at any
time when sewing is stopped, before or
during Drive mode. Manual operations
include:
•
Thread Clamp
•
Appliqué
•
Change Frame
•
Thread Trim
Thread Clamp
Thread Clamp opens the thread
clamps, so sewing heads can easily be threaded.
Using Thread Clamp
1. If you were sewing, move the Start/Stop bar to the right to stop.
2. Press the Manual softkey. The Manual menu displays.
3.
Press A, below the Thread Clamp icon. The thread clamp on all active
heads is released.
4. Press A again to move the clamps back in place once you are done
threading.
BENS Operation Guide - 12/99 Sewing 3-11
Manual Operations Screen
Manual
Softkey