Barudan BENS, Руководство по эксплуатации

Страница: 95 / 103

DISPLAYED MEANING ACTION REQUIRED
D04 Needle Bar
Positioner
Machine cannot locate the
next needle during a color
change.
Probably an error with the color
change board. Call your techni-
cian.
D05 Unable to Color
Change
Machine is not able to
color change.
Either the thread keep solenoids
are stuck, the jump stitch sole-
noid is not engaging or the
handwheel is not at the correct
position to allow a color change.
D06 Tripping Main
Motor
Power fluctuations to
driver unit.
Start with the Start/Stop bar.
D07 Main Motor
Overload
Main driving motor has
been overloaded.
Turn the power off. Check for a
bind by turning the handwheel.
Check for excessive thread be-
hind the sewing hook.
D08 Limit of the
Frame
The pantograph has
reached one of the soft
limits.
Reposition the start point of the
pattern so that it sews within the
soft limits. Or, reset the soft lim-
its for a larger sewing field.
D09 Stop switch error The drive stop switch is
stuck or defective.
Check to see if the stop switch
is stuck on. If error continues,
call a service technician.
D12 Trimmer’s Slider Slider in path of needle or
not in proper position.
Return the slider to the proper
position.
D13 Unable to Stitch
Back
A color change or the be-
ginning of the pattern
reached while automend-
ing.
None. Move the Start/Stop bar
to the left to begin sewing for-
ward in the pattern.
D14 Start with Bar
Switch
You must use the
Start/Stop bar to execute
the selected manual op-
eration.
Move the Start/Stop bar to the
left to execute the command.
BENS Operation Guide - 12/99 Error Codes 4-5