Barudan BENS, Руководство по эксплуатации

Страница: 45 / 103

4. Press C, below the Rename icon. A list
of alphabet and numeric characters
displays, along with the current name.
5.
Press A, below the Backspace icon, to
delete the characters in the old name.
Each time you press A, another
character is deleted.
6. A box displays around the selected
character in the list. Use the jog keys to
move the box to the first character of the
new name.
NOTE: Although the Pattern List shows
upper and lower case letters exactly as
entered, if the pattern is later saved to
floppy disk, lower case letters are
automatically changed to upper case.
7. Press the origin key, in the center of the
jog keys, to enter the selected character
in the pattern name.
8.
Repeat Steps 6 and 7 until the entire
name is programmed. A pattern name
can contain up to eight characters. If
you make an error, press A, to
backspace.
9. Press D, below the Execute icon, to
accept the new name. To cancel, press the Memory softkey, exiting
without changing the pattern name.
When complete, the BENS beeps and the basic screen displays. If
desired, press the Memory softkey to see the list and verify the new
pattern name.
2-14 Memory Operations BENS Operation Guide - 12/99
Rename Screen