Barudan BENS, Руководство по эксплуатации

Страница: 56 / 103

Make sure you know the memory location numbers of the patterns you
want to merge before beginning the process.
6.
When the desired pattern number displays, press D, below the Execute
icon, to begin copying. When complete, the BENS stays in Copy
mode, so you can continue to add to the memory location.
7. Press B, below the Jog icon to
return to the Jog screen. At this
point, add the movement
between the two patterns.
8.
The icon next to the Jog icon,
indicates the active movement
type. The default movement is
jump jog.
Press C, below the Jump Jog
icon, to select the type of
movement, walk stitches or
jump stitches. Pressing C
toggles between the two stitch
types.
9. Use the jog keys to move the pantograph
the distance for the first movement. Use
the H and V values shown on screen as a
reference. See page 1-19 for an
explanation of Incremental and Absolute
values.
10.
Press and hold D, below the Execute
icon, until the BENS beeps once. The
pantograph movement is added to the
memory location. The screen shows that
stitches have been added.
NOTE: If you need the pantograph to
move in a specific path, for example, over,
then down, you must separately execute
the movement in each direction. If not, the
BENS moves using the shortest possible
path.
11.
Repeat Steps 9 and 10 to add the desired
number of walk or jump stitches to the pattern, until the pantograph is
in the desired position for the start of the second pattern.
BENS Operation Guide - 12/99 Memory Operations 2-25
Jog Screen