Barudan BENS, Руководство по эксплуатации

Страница: 26 / 103

Erasing all Patterns in Memory
1.
Turn off the BENS.
2. While the machine is off, press and hold the
Memory softkey. While holding the Memory
softkey, press the ON softkey. Continue to
hold down the Memory softkey.
The Memory Erase screen displays:
3. Press A, below the OK icon, to erase the
pattern memory. To cancel the command,
press C, below the Cancel icon.
After a few seconds, the Origin Set screen
displays, showing a message indicating that
there are no patterns stored in memory.
4. Press D, below the Check icon, to clear the
error message. The machine beeps three
times, then the normal Origin Set screen
displays.
5.
Press D, below the Execute icon, to let the
machine seek origin.
Floppy Disks
The BENS uses 3.5" floppy disks. Disks come in different capacities: double sided,
double density, which hold 720K (0.72 megabytes) of data and double sided, high
density, which hold 1.44 megabytes (1440K) of data.
•
The BENS can read both double sided, double density and double
sided, high density disks (FDR, Tajima, Melco, Happy and Toyota
formats on 2DD or 2HD, all others only double density).
•
The BENS can only write to FDR format disks, on either 2DD or
2HD disks.
NOTE: FDR2HD disks are MS-DOS format. Therefore, these pattern disks
can be read, copied, and transferred via personal computer. FDR2DD
format is proprietary, and cannot be used this way.
BENS Operation Guide - 12/99 Overview 1-21