Barudan BENS, Руководство по эксплуатации

Страница: 79 / 103

•
Press B, below the plus icon, to move forward in the pattern one
stitch at a time, from the current stitch.
•
To move rapidly through the stitches, one stitch at a time, press and
hold either A or B to move in the required direction.
•
Press C, together with either A or B, to move backward or forward in
increments of 1000 stitches.
Only the stitch number on the display is changed.
6. When the display shows the desired stitch number, press D, below the
Execute icon, to move the pantograph to the indicated stitch.
7.
When the pantograph is at the correct position and the display shows
the desired stitch number, press the Float softkey to exit Float mode,
returning to Drive mode.
8. Move the Start/Stop bar to the left or press the green Start Button to
begin sewing from this stitch.
Using High Speed Float
1. Press the Memory softkey. The Pattern List displays.
2. Use the jog keys to select the desired pattern.
3. Press the Drive softkey. The light above the key is on, showing the
machine is in Drive mode, ready to sew.
4. Press and hold the Float softkey until the BENS beeps. The light
above the Float key is flashing, indicating that High Speed Float is
active. The following screen displays, telling you to use the Start/Stop
bar.
5. Move the Start/Stop bar to the left or
press the green Start Button.
On the screen, the BENS advances
through the stitches in the pattern. Only
the stitch count on the display changes at
this time.
6. Before it reaches the desired stitch
number, move the Start/Stop bar to the
right to stop advancing. The pantograph
moves to that stitch.
NOTE: High speed float is not
recommended for reaching a specific stitch.
7. Press the Float softkey to exit the Float mode, returning to Drive mode.
3-16 Sewing BENS Operation Guide - 12/99
Memory
Softkey
Drive
Softkey