Barudan BENS, Руководство по эксплуатации

Страница: 89 / 103

•
Press B, below the Plus icon, to move
forward in the pattern (if you backed
up too far), one stitch at a time, from
the current stitch.
•
To move rapidly through the stitches,
one stitch at a time, press and hold
either A or B to move in the required
direction.
•
Press C, together with either A or B, to
move backward or forward in
increments of 100 stitches.
The changed stitch number flashes on the
display.
NOTE: You MUST change the stitch
number to one lower than the original stitch number where sewing was
stopped. If you do not, the temporary repair stop will not register.
5.
When the desired stitch number is shown, press D, below the
Temporary Stop icon, to enter the stop mark. The BENS beeps twice
and the display returns to the normal Drive screen, showing the
original stitch number where sewing was stopped.
6. Manually turn off the head where sewing was unsatisfactory. See the
Mechanical Guide for instructions on turning off a head.
7. Move the Start/Stop bar to the left or press the green Start Button to
continue sewing the pattern on all other heads.
8.
Repeat Steps 1-7, if necessary, to insert additional temporary repair stop
markers in the pattern. Up to ten temporary stops can be inserted in
each run of the pattern.
NOTE: If you insert more than one temporary repair stop in a run, you
may want to keep a record of the sewing head that each mark pertains to.
The second temporary repair stop marker inserted in a run must be at a
higher stitch number than the first.
9.
When this run of the pattern is complete, remove the garments from all
sewing heads that completed the pattern. Leave the garments on the
heads that were turned off.
•
Do not exit Drive mode. If you do, the temporary repair stop
markers are deleted.
Place new garments on the other heads, then begin sewing the next run
of the pattern.
When the machine reaches the first temporary stop marker in the
pattern, it stops sewing and displays the D27 message.
3-26 Sewing BENS Operation Guide - 12/99
Temporary Stop Screen