Barudan BENS, Руководство по эксплуатации

Страница: 60 / 103

Saving a Pattern Using COM
1. Press the Memory softkey. The pattern list displays, showing the
patterns stored in memory.
2. Use the jog keys to select a pattern from the list. A box outline
displays around the selected pattern.
3.
Prepare the device according to its user’s manual, and connect it to
the BENS.
4. Press A, below the Memory Out icon.
5.
The icon in the middle left of the screen
identifies the active device. It should show
the COM icon, indicating communication
through the serial communication port.
If this is not the current icon, press A, below
the Device icon, to toggle the active device
to the COM port. Pressing A toggles
between the device options, Disk and
COM.
6.
The letter to the right of the device icon at
the middle left of the screen
identifies the selected tape code.
If necessary, press B, below the
Code icon, to select the
appropriate tape code. Pressing B
toggles through the code options:
U, F and El.
BENS Operation Guide - 12/99 Memory Operations 2-29
Memory
Softkey