Barudan BENS, Руководство по эксплуатации

Страница: 57 / 103

12. When all movement has been added after the first pattern, press B,
below the Copy icon. The Memory Copy screen displays.
13. Use the jog keys to select the second pattern in memory.
NOTE: The pattern list is not displayed. Make sure you know the
memory locations you want to use before starting.
Pressing B cancels Copy mode, returning to Jog mode.
14. Press D, below the Execute icon to begin copying. When complete, the
BENS stays in Copy mode, so you can add additional movement and
patterns.
If desired, press B, below the Jog icon, to return to the Jog mode screen.
NOTE: If Program parameter 4, Origin, is On, the BENS will return to the
origin of the first design automatically. Refer to page 2-15 for information
on Program parameters.
If you are not using Origin Return and you want the pantograph to return
to the origin of the first pattern, you will need to enter a final jog
movement and position the pantograph so that the H and V values are Ø.
15. When all movement and patterns are added, press the Read softkey to
exit Jog mode, returning to the basic screen.
Press the Memory softkey to see the Pattern List and verify the merged
pattern stitch count. It should equal the total of all patterns added plus
the total number of jump/walk stitches added.
The BENS automatically gives the merged pattern the same name as
the first pattern that was added. Use the Rename option to give the
merged pattern a different name. See page 2-13 for instructions.
2-26 Memory Operations BENS Operation Guide - 12/99
Read
Softkey
Memory
Softkey