Baby Lock Enterprise BNT10L, Инструкция и справочник

Страница: 189 / 312

Editing the Embroidery Pattern (Pattern Editing Screen) 187
—————————————————————————————————————————————————————————————————————————————————————
5
5
Touch .
Trimming the threads
between characters
If the machine is set to trim the threads between the
characters, the jumpstitches between the characters
are reduced and any other necessary procedures
after embroidering are reduced. However, the
embroidering time will increase if the threads are
trimmed between each of the characters.
1
Touch so that it changes to .
• Each touch of the key turns the setting
either on or off.
Changing the thread density
(only for selected character and frame
patterns)
The thread density for some character and frame
patterns can be changed.
A setting between 80% and 120% in 5%
increments can be specified.
1
Touch .
X
The screen shown below appears.
1 Selects a less thread density
2 Selects a more thread density
3 Touch this key to close this screen.
■
Selects a less/more thread density
Threads are not
trimmed.
Threads are
trimmed.
Less Standard More
3
1
2